Wall insulation in Abilene TX - every cavity filled, rooms that hold their temperature
Rooms that feel drafty or swing hot and cold often come down to empty or slumped wall cavities. We fill them so the room holds steady.
The owner looks before anyone quotes
I usually come out myself to look at the job, because walls hide most of what matters and I'd rather see it than guess. Our installers do the work after that.
Fixing uncomfortable houses since 2017
We've been in business since 2017, and I came back to this trade because I like working out why a house won't stay comfortable. If wall insulation won't fix the room you called about, I'd rather tell you than sell it.
Licensed and insured, safety checks first
We're licensed and insured. I want the house safe when we leave, so the checks come before any insulation goes into your walls. Call (325) 266-6064 or use our estimate form to set up a visit.
Wall insulation for Abilene, TX homes
Wall insulation fills the spaces between your studs with batts, blown-in fill sent through a hose, or spray foam. A&D Abilene Insulation Company does it for homes in Abilene, TX and the cities around it, for a room that won't hold its temperature or a bill that seems too high.
A drafty room over the garage, or outside walls that are cold to the touch, usually points to cavities that are empty, half full or settled at the bottom. Blown-in insulation packed densely enough slows the air moving through the wall as well as the heat, so the goal isn't just some insulation in there. It's every cavity filled to the top, around the wires and pipes.
Three things move the price: how much wall you want done, whether we go in from inside or outside, and which material your framing and siding can take. The schedule turns on the same things, plus any permit. When a job inside Abilene city limits calls for a building permit, we take care of it with the city before we start. Your estimate gives you the number for your own walls.
How we handle wall insulation
Framing and siding decide the plan
Walls are the puzzle job, so I work out the framing and the siding before I pick a material. Batts, rolled blankets of insulation, are a good value when the wall is open and the cavities are an even size that matches the batt, but they have to be cut snug around pipes and boxes without getting squashed. Behind finished drywall or odd framing, blown-in insulation is usually the better fit, because it can fill awkward cavities and the space around whatever's in the way.
Every cavity filled to the top
Blown-in only works if each cavity fills completely and densely enough that it won't settle, because settling leaves empty spots where heat and air get through, so the filling is the part we're careful with. Before the hose comes out, we cover the floor below the work and close off the area so dust stays out of the rest of the house. It's also fair to ask any crew whether they'll make sure the wall can take the air pressure and patch holes first, so nothing blows out.
Sealing leaks and reaching basement walls
Insulation can't do its job with air pouring past it through gaps around outlets, pipes and the top of the wall, so we often pair wall work with air sealing services, closing those gaps before the insulation goes in. That's the part people skip, and it's usually why a freshly insulated room still feels drafty. Walls below ground are their own job with their own materials, so if the cold room is downstairs, look at basement insulation, where we deal with those walls.
Get a written estimate for your walls
Send the form and we'll get back to you within one business day to set a time. I'll come out, look at your walls and explain what I found, and the in-person estimate is free with no obligation.
(325) 266-6064How a wall job goes, start to finish
We look at your walls
I come out, look at the walls and the attic or crawl space they tie into, then ask how the house feels and what burns fuel inside. Having your siding type and a rough idea of the wall area handy helps.
Written estimate and permit
I put what I'd do and why into a written estimate, including the material and whether we'd work from inside or outside. If the job calls for a permit, that gets handled before any work starts.
Install and walk-through
Our installers fill the walls and patch or close up whatever they opened. When they're finished, I walk through the job with you before we call it done. Satisfaction guaranteed on every job.
Wall insulation questions from Abilene homeowners
Can you insulate existing walls without tearing out the drywall?
Yes, closed walls are usually filled through small holes instead of being torn out. From inside, the holes get patched or hidden behind chair rail molding, and from outside, siding comes off as needed. Pick inside if you'd rather have touch-ups on your walls, outside if you'd rather we work on the siding.
Can you blow cellulose into brick or block walls?
It's not recommended, because the cellulose makers' trade group advises against cellulose in the cavities of masonry walls and in walls below ground. A brick or block house needs another material, which I pick after seeing how the wall is built. Spray foam seals air very well, and the low-density kind flexes as the house moves, while denser foam wears better but handles movement less.
Do I need a permit for wall insulation in Abilene?
Abilene requires a building permit before improvements or alterations to a property, and the city's Building Inspections Division issues them and takes questions about whether a project needs one. Its rules follow national energy and house codes with local changes. If we're not sure your job needs a permit, we ask the office before we start.
How much does wall insulation cost in Abilene, TX?
Across the US, installing blown-in wall insulation usually costs about $4 to $4.50 per square foot. That's a national figure for blown-in work, not our price. Your estimate gives you the number for your own walls, and I'll explain what's driving it.